NEXT GENERATION POWER
ROBLAST EFI 5000 jetter.
Learn more
Popular Products
ROBLAST EFI 5000 jetter
High pressure drain cleaning jetter for clearing blockages from drains up to 8"
CASECAM
30 m Inspection Camera
ROMAX Compact III
Compact press machine
PRESS RINGS
Press Rings Now Available! Press in narrow and difficult places
ROCAM 4 Plus
30 m or 65 m Inspection Camera
ROMAX 4000
Press machine
ROBEND 4000 CL
Battery powered bender up to 2"
ROAIRVAC R32 2.0/5.0 CL
Battery powered vacuum pumps
RODRUM CL
Battery powered drain cleaning machine up to 100 mm
R600 CL
Battery powered sectional drain machine up to 150 mm
Cordless Alliance System
Your battery. Your trade. Your freedom.
Learn more
ROTHENBERGER CAS Products
Battery-powered tube bending machine
With the ROBEND 4000 CL battery-powered bender, HVAC installers and refrigeration technicians are independent of the power supply. They can pre-set the bending angle to produce several bends with the same angles, accurate to size.
Battery-powered threading machine
With the battery-powered SUPERTRONIC 2000 CL thread-cutting machine, users no longer need a power socket. Just as powerful as the corded model, the machine cuts threads on pipes up to 2 inches in diameter, even close to the wall, as the cutting head mount is off-centre.
Battery-powered vacuum pump
With the battery-operated vacuum pump, it is possible to work for up to 90 minutes without power supply (with 8 Ah battery). Thanks to the integrated magnetic check valve, the vacuum is maintained even when the battery is empty, thus guaranteeing safe working.
Battery-powered pipe cleaning machine
With the battery-operated R600 CL VarioClean pipe cleaning machine, HVAC service technicians and pipe cleaners can start work immediately on site. The three speed levels of the VarioClean electronics allow pipes to be unclogged, cleaned and spun clean.
Battery-powered pipe cleaning machine
With the battery-powered pipe cleaning machine RODRUM CL VarioClean, direct use is possible without delay. LEDs on the machine illuminate the place of use and flash when the battery is low.
Battery-powered pipe saw
The PIPECUT Mini CL battery-powered pipe saw brings a revolutionary tool concept to the construction site: compact, powerful and universal, it makes it easier for users to cut pipes. Its working principle is based on a clamping system in which the saw is guided.
Battery-powered tube bending machine
With the ROBEND 4000 CL battery-powered bender, HVAC installers and refrigeration technicians are independent of the power supply. They can pre-set the bending angle to produce several bends with the same angles, accurate to size.
Battery-powered threading machine
With the battery-powered SUPERTRONIC 2000 CL thread-cutting machine, users no longer need a power socket. Just as powerful as the corded model, the machine cuts threads on pipes up to 2 inches in diameter, even close to the wall, as the cutting head mount is off-centre.
Battery-powered vacuum pump
With the battery-operated vacuum pump, it is possible to work for up to 90 minutes without power supply (with 8 Ah battery). Thanks to the integrated magnetic check valve, the vacuum is maintained even when the battery is empty, thus guaranteeing safe working.
Battery-powered pipe cleaning machine
With the battery-operated R600 CL VarioClean pipe cleaning machine, HVAC service technicians and pipe cleaners can start work immediately on site. The three speed levels of the VarioClean electronics allow pipes to be unclogged, cleaned and spun clean.
Battery-powered pipe cleaning machine
With the battery-powered pipe cleaning machine RODRUM CL VarioClean, direct use is possible without delay. LEDs on the machine illuminate the place of use and flash when the battery is low.
Battery-powered pipe saw
The PIPECUT Mini CL battery-powered pipe saw brings a revolutionary tool concept to the construction site: compact, powerful and universal, it makes it easier for users to cut pipes. Its working principle is based on a clamping system in which the saw is guided.